From richard at imagecraft.com Sat Jan 10 23:20:24 2009 From: richard at imagecraft.com (Richard Man) Date: Sun Jan 11 00:24:59 2009 Subject: [Icc-mot] ICC12 V7.06 Released Message-ID: <200901110824.n0B8OlwJ000448@mail.imagecraft.com> Happy New Year! Very minor release: V7.06 - Jan 10th, 2009 Enabled -NC Non-Commercial User license. Header Files - re-added E128 header file // richard blog: On-line orders, support, and listservers available on web site. [ For technical support on ImageCraft products, please include all previous replies in your msgs. ] From office at eckel-electronic.com Thu Jan 22 01:24:18 2009 From: office at eckel-electronic.com (Bernd Eckel) Date: Thu Jan 22 02:29:25 2009 Subject: [Icc-mot] Changing design from MC9S12DG256 to MC9S12XD256 does not work Message-ID: <4D58A2CDCCA140F18526D8487FA60D8C@BUERO> Hi, I want to change my design from MC9S12DG256 to MC9S12XD256. After compiling existing code with ICCV7 Advanced and burning it into the MC9S12XD256 (with NOICE) the paged data is missing. How can I adjust ICCV7 for MC9S12XD256 to put data in proper page? Best regards Bernd Eckel -------------- next part -------------- An HTML attachment was scrubbed... URL: http://dragonsgate.net/pipermail/icc-mot/attachments/20090122/467ecbbc/attachment.html From ekarpicz at freemail.lt Thu Jan 29 01:19:01 2009 From: ekarpicz at freemail.lt (Edward Karpicz) Date: Thu Jan 29 02:25:18 2009 Subject: Re--[Icc-mot] Changing design from MC9S12DG256 to MC9S12XD256 does not work Message-ID: Hi, On Thu Jan 22 2009 Bernd Eckel wrote: --------------------------- Hi, I want to change my design from MC9S12DG256 to MC9S12XD256. After compiling existing code with ICCV7 Advanced and burning it into the MC9S12XD256 (with NOICE) the paged data is missing. How can I adjust ICCV7 for MC9S12XD256 to put data in proper page? Best regards Bernd Eckel -------------------------- I found your message in icc-mot archive, but didn't receive it. That's why I didn't reply earlier I'm not sure if icc-mot functioning properly. Could you tell more about your problem? Did you select proper target in NoICE, MC9S12XDP512? Please note X letter in target name. Also make sure Expanded memory setting in ICC is 0x380000.0x3FFFFF for XDP512 and 0x380000.0x39FFFF:0x3E0000.0x3FFFFF for XD256 Regards Edward From richard-lists at imagecraft.com Thu Jan 29 01:52:02 2009 From: richard-lists at imagecraft.com (Richard Man) Date: Thu Jan 29 02:57:38 2009 Subject: Re--[Icc-mot] Changing design from MC9S12DG256 to MC9S12XD256 does not work In-Reply-To: References: Message-ID: <200901291057.n0TAvaSi050278@mail.imagecraft.com> At 01:19 AM 1/29/2009, Edward Karpicz wrote: >I found your message in icc-mot archive, but didn't receive it. >That's why I didn't reply earlier I'm not sure if icc-mot functioning properly. Hmmm email me off-list. Did your email address change? >Could you tell more about your problem? Did you select proper target >in NoICE, MC9S12XDP512? Please note X letter in target name. >Also make sure Expanded memory setting in ICC is > >0x380000.0x3FFFFF for XDP512 Bernd, Oliver confirms the same thing that for XD256, it's 0x380000..0x39ffff,0x3e0000..0x3fffff Edward, the current IDE does not have an entry for XD256 yet. I will add it. Thanks!! >and > >0x380000.0x39FFFF:0x3E0000.0x3FFFFF for XD256 > // richard // photo & calligraphy blog: http://rfman.wordpress.com From richard at imagecraft.com Thu Jan 29 19:26:42 2009 From: richard at imagecraft.com (Richard Man) Date: Thu Jan 29 20:32:24 2009 Subject: [Icc-mot] File System API Message-ID: <200901300432.n0U4WL4O065733@mail.imagecraft.com> We are now looking into our first plug-in module for eMOS, which is a file system and SD driver. We will probably also include a standalone version that does not require eMOS. The eMOS version will of course fully support multitasking. In terms of API, the obvious choice for the FS is in fact the stdio.h C API,... (Read the complete article below. I welcome any comments and suggestions. Thanks) http://imagecraft.wordpress.com/2009/01/29/filesys-and-sd-modules-plus-emos-update/ // richard blog: On-line orders, support, and listservers available on web site. [ For technical support on ImageCraft products, please include all previous replies in your msgs. ] From richard at imagecraft.com Fri Jan 30 02:10:16 2009 From: richard at imagecraft.com (Richard Man) Date: Fri Jan 30 03:15:07 2009 Subject: [Icc-mot] OT: Fine Arts Prints Message-ID: <200901301115.n0UBF5Po071328@mail.imagecraft.com> I am sorry for this OT commercial message, but please read http://rfman.wordpress.com for my outside hobby and print sales. I will not burden the mailing lists with further messages. // richard